Built-Up Roofing: What Owners Should Know
Built-up roofing combines reinforcing sheets and asphalt in layers, with repairs based on the roof's condition and drainage.
Cowan Roofing Inc. · Published · Updated

Built-up roofing is a layered roofing system used on low-slope buildings. You may hear it called BUR or, less precisely, a tar-and-gravel roof. If your building has one, the important question is its condition and how the layers work together.
A familiar name does not tell us what is underneath. Old plans, repair records and an in-person assessment help establish that.
How The Layers Work
A built-up membrane combines reinforcing sheets with asphalt between the layers. Its surface protection can vary by system. The roof also includes a supporting deck, flashing and, in many assemblies, insulation.
Think of it as a complete roof rather than a single exposed surface. Repairing one visible spot may be enough for a local problem. It will not address unrelated damage elsewhere in the assembly.
What We Need To Check
Tell us where water appears inside and when it happens. Let us know about past repairs, roof access and equipment on the building. These details help guide the inspection.
The assessment should consider drainage, roof edges, openings and the condition of the existing layers. If there are signs of trapped moisture, that needs investigation before selecting a repair or restoration approach.
A roof can look different in two areas because it has been patched or resurfaced. That is a reason to ask about its history, not a reason to diagnose the whole roof from a photograph.
Repair, Restore Or Replace?
A repair focuses on a defined problem. Restoration may retain a suitable existing roof and add a specified surface system after preparation. Replacement removes or replaces roofing according to the agreed scope.
Ask for a clear explanation of what stays, what comes off and what is being repaired. If insulation or decking needs attention, the proposal should explain how that work will be handled.
New built-up installation is an option to discuss for the individual project. Product supply, the proposed assembly and installation requirements must be settled before it becomes a firm scope.
Plan Around The Building
For an occupied business, tell us about deliveries, entrances, air intakes and hours when access is restricted. Include any rooftop equipment that another trade needs to move or disconnect. Agreeing on those responsibilities early makes the proposal more useful.
You can also compare modified bitumen and TPO roofing to understand other low-slope roof families.
Start With A Roof Visit
Fill out our free estimate form with the building address and a short description of the issue. We will follow up to arrange an in-person assessment. The visit gives us a basis for discussing the work and preparing a written proposal.