Cowan Family Crest
Menu

Custom-Bilt Ribbed And Corrugated Metal Roofs

Custom-Bilt TFR-36, PBR and corrugated panels give metal roofs different rib patterns with exposed fasteners.

Cowan Roofing Inc. · Published · Updated

Silver PBR metal roofs on school buildings with a landscaped courtyard
Custom-Bilt PBR Metal Roofing

Custom-Bilt lists TFR-36, PBR and corrugated panels in its exposed-fastener roofing range. These roofs use a different panel connection and visible pattern from standing seam. We regularly use these products; brand names do not imply a formal partnership.

Three Different Panel Patterns

TFR-36 and PBR have raised rib patterns across the panels. Corrugated metal has a rounded repeating pattern. They can all be described casually as metal roofing, but the shapes and connections are not interchangeable.

A sample or profile drawing makes those differences easier to see. We can compare the pattern with the building's siding, roof shape and trim. For a wide open roof, think about the full pattern seen from the ground rather than judging the roof from one small piece.

Exposed Fasteners And Roof Details

In an exposed-fastener system, screws pass through the panel at the specified points. Seams, flashings and fasteners all need attention as part of the roof. The PBR-TFR guide covers specific details for those panel families.

Matching trim helps complete the ridges, edges and openings. The roof and wall applications still need their own details, even when a building uses similar-looking panels on both. Ask which pieces and connections are included in the scope. Include any existing skylights or roof vents in that discussion so the surrounding work is clear.

For An Existing Roof, Find The Problem First

We need to identify the installed panel before recommending replacement pieces. A close color match does not show that the rib shape, metal and joint fit. Old invoices, labels or leftover sheets can help establish what is on the building.

Tell us where water appears indoors and when it happens. We inspect panels, seams, flashings and fasteners to understand the entry point. That helps distinguish a targeted repair from replacing a section or considering a larger reroof.

For A New Roof, Price The Whole Job

The proposal should describe the supporting surface, underlayment and detail work. For replacement, include tear-off, disposal and how concealed deck damage will be handled. Gutters and wall connections may also need work while the covering is being replaced.

We discuss material handling and access as well. Farm and workshop buildings can have active work areas, stored equipment or restricted delivery space. Knowing those conditions helps us explain the work plan alongside the selected profile, finish and matching parts.

Keep any matching roof and wall panels identified separately. Their fastener patterns and trim details still need to suit the actual application.

Arrange An In-Person Estimate

Send the project address and a short description through our contact form. We contact you to arrange an in-person estimate, then prepare a proposal after the visit.