Taylor Metal Roofing: Standing Seam And Ribbed Panels
Taylor Easy-Lock, MS-200 and Tuff Rib offer standing seam and ribbed metal panels with different connections and roof patterns.
Cowan Roofing Inc. · Published · Updated

Taylor Metal Products makes standing seam and ribbed metal roofing. We regularly use these products; brand names do not imply a formal partnership. For a house, shop or commercial building, we start by looking at the roof and then compare the panel styles that fit the job. The important differences are easy to understand once you can see the profiles side by side.
Easy-Lock For A Clean Roofline
Easy-Lock is a standing seam panel. The joints form raised lines along the roof, and the fastenings sit beneath the panel connection. It gives the roof a clear, simple pattern rather than a field of exposed screws.
The finish changes the look just as much as the panel. A dark metal roof can make a strong outline above light siding. A softer brown or gray can sit more quietly beside stone, wood and landscaping. We can discuss samples against the actual house, including the gutters and trim.
MS-200 For A Mechanically Seamed Roof
MS-200 uses raised seams that are closed with seaming equipment. It is a different system from Easy-Lock, with its own clips, connections and roof details. Long roof runs and commercial buildings are good reasons to compare the systems carefully.
The building comes first. We look at the roof shape, drainage, existing covering and places where the metal meets walls or rooftop equipment. A panel name alone does not describe all that work. The proposal should show what is being installed around the panels too.
Tuff Rib For A Repeating Rib Pattern
Tuff Rib belongs to Taylor's exposed-fastener range. Screws pass through the panel at the specified fastening points. It has a different appearance and maintenance approach from concealed-fastener standing seam.
It is worth comparing for shops, outbuildings and other suitable roofs where a ribbed metal look makes sense. For repairs, identifying the existing profile matters. A panel that looks close from the ground may not fit the neighboring sheets or their connections.
What Goes Into The Job
For a reroof, we discuss tear-off, disposal, the wood deck, underlayment and any damaged sheathing. Then come the valleys, ridges, flashings and roof openings. These details control how the roof comes together and how it looks when it is finished.
Taylor has a Sacramento branch. We confirm the selected profile, finish and matching parts with the supplier before the order is settled. That keeps the material choice tied to the written scope rather than a similar-looking substitute.
Start With An In-Person Estimate
Send the contact form with your project address and a short description. We contact you to arrange an in-person estimate. After the visit, we prepare a proposal for the work discussed.